The laser tool head, equipped with a 2W blue laser diode, can cut and burn many materials.
Use lighted laser power to easily cut wood, paper, cardboard, polycarbonate and other hard materials at the same time. Turn Zmorph into a marking or burning machine.
How are files prepared? Use your favorite CAD program (eg Rhinoceros 3D) to create 2-D geometry and save it as a DXF file.
Then drag and drop the file into the Voxelizer software.
Once this is done, open the laser tool as shown above and adjust the parameters. Generally, while carving is performed at a speed of 10-20 mm / s, lower speed is required for cutting (1-3 mm / s). The working height allows you to adjust the focus (but it should be as close to 0 as possible – so that the laser is surrounded by the guard and becomes invisible).
Then click ‘create laser paths’, make sure the laser tool is activated and press the PLAY key!
ATTENTION: ABSOLUTELY USE THE PROTECTIVE GOGGLES GIVEN! YOU WILL REMEMBER TO RISK YOUR EYES AT YOUR OWN RISK!