• 1.75mm AquaSolve™ – PVA – Suda Eriyen Filament

1.75mm AquaSolve – PVA – Water Soluble Filament

Thanks to the water-soluble filament, it is suitable for use as a support material in double-headed printers.

$ 60,00 + VAT

Order

Request Demo

OVERVIEW

General Description

Because the PVA filament is very sensitive, the recommended printing speed is 10 ml per second. Because PVA filament is water-soluble, we recommend that you do not keep it in damp environments.

The optimum working temperature of the filament is about 195 degrees. PVA filament can be used with ABS and PLA filaments.

If you reduce the gap between the part and the support to 0 mm, you can get a result like a piece that is completely out of smooth SLS printers.

 

TECHNICAL DATA DOCUMENT

DOCUMENTS

Documents

Color : Transparent
Filament Net Weight : ± 0.3 Kg
Material : polyvinyl alcohol (> 75%), aliphatic polyol (<20%) and calcium Distearate (<5%)
Transparency : Opaque
Diameter : 1.75 mm
Diameter Tolerance : 0.10 mm ±
Recommended Printing Temperature 180-205 ° C
Melting point : ± 163 ° C
Recommended Table Temperature: 0 ° C
Ovalidity Tolerance (max) : ± 5%
Density (21.5 ° C): –
Speed: 15 ml sec.